"Weatherproof Exterior Wall Paint Product Manual"

I. Product overview
Weather-resistant exterior wall paint is a high-quality exterior wall paint, with excellent weather resistance, stain resistance, color retention and anti-mildew and anti-alkaline properties, can provide lasting protection and decorative effects for the exterior wall.

Second, product characteristics

1. Excellent weather resistance, can resist the erosion of natural factors such as sunlight, rain, wind and sand.
2. Good stain resistance, so that the wall is not easily contaminated with dust and stains, easy to clean.
3. Excellent color retention, keep bright colors for a long time, and it is not easy to fade.
4. Effective anti-mildew and anti-alkali, prevent mold breeding and damage to the wall caused by alkaline substances.
5. It has a certain hiding power, which can cover the subtle defects on the surface of the wall.

3. Product parameters

1. Color: A variety of colors are available (please refer to the color card)
2. Finish effect: matte
3. Capacity: 20 liters/barrel
4. Coating rate: 8 square meters/liter/single pass (when the dry film thickness is 25 microns), the actual amount varies due to the construction method and the base surface condition.

Iv. Construction guide

1. Preparation before construction
1. Ensure that the surface of the base is firm, smooth, dry, clean, free of oil, dust, loose matter, mold, etc. If there are cracks, empty drums and other problems, should be repaired in advance. The moisture content of the base shall not be greater than 10%, and the pH value shall not be greater than 10.
2. The old wall needs to be removed powder, peeling paint film, and cleaned.
2. Construction method
1. Brush, roll or spray can be used for construction.
2. Usually need to be painted twice, under normal circumstances each interval of at least 4] hours to dry (drying time will vary with the change of ambient temperature and humidity).
3. Clean tools
1. Clean the tool with water immediately after use.

5. Precautions

1. The ambient temperature during construction should be above 5℃, and the relative humidity should not be greater than [specific value]%, to avoid construction in wet, cold or high temperature and high humidity weather conditions.
2. Dilute in strict accordance with the prescribed dilution ratio to avoid excessive dilution affecting the performance of the film.
3. Good ventilation conditions should be maintained during construction.
4. Avoid mixing with other paints, organic solvents or powders.
5. Please store the product in a cool, dry and ventilated place, away from direct sunlight and away from fire.

6. Packaging and storage
It is packed in plastic drums. Store in an environment of 5-35 ° C to avoid inversion or collision.

Vii. Security Matters

1. Please wear appropriate protective equipment during construction, such as gloves, masks, goggles, etc.
2. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical assistance.
3. Keep products out of reach of children.

8. Supporting products (if any)
It is recommended to use the transparent alkali resistant primer of this brand to obtain a better coating effect.