Essential details
Shipping:Ocean freight
Product Introduction
"Water sand imitation stone paint product manual"
I. Product overview
Water-coated sand imitation stone paint is a new type of exterior wall decoration paint, which combines the advantages of water-coated water paint and real stone paint. It is mainly used to imitate the effect of litchi granite stone, and can provide beautiful and durable decorative protection for buildings.
Water-coated sand imitation stone paint is a new type of exterior wall decoration paint, which combines the advantages of water-coated water paint and real stone paint. It is mainly used to imitate the effect of litchi granite stone, and can provide beautiful and durable decorative protection for buildings.
Second, product characteristics
1. Excellent imitation stone effect, high appearance imitation degree, can reach more than 95%, showing realistic granite texture and texture.
2. The construction is simple and fast, one shot molding, compared with the traditional process can shorten the construction period and reduce labor costs.
3. It has excellent outdoor weather resistance, good stain resistance, self-cleaning function on the surface, and can maintain a good appearance for a long time in the natural environment.
4. Can be sprayed thicker at a time without cracking.
5. The water resistance of the initial paint film is excellent.
6. It is an environmentally friendly coating.
1. Excellent imitation stone effect, high appearance imitation degree, can reach more than 95%, showing realistic granite texture and texture.
2. The construction is simple and fast, one shot molding, compared with the traditional process can shorten the construction period and reduce labor costs.
3. It has excellent outdoor weather resistance, good stain resistance, self-cleaning function on the surface, and can maintain a good appearance for a long time in the natural environment.
4. Can be sprayed thicker at a time without cracking.
5. The water resistance of the initial paint film is excellent.
6. It is an environmentally friendly coating.
3. Product parameters
1. Ingredients: The main raw materials include pure acrylic silicone emulsion, color sand, high-performance additives, etc.
2. Theoretical dosage: 1.5-1.8kg/2 times per square meter of coating (the actual dosage will vary depending on the construction method, flower shape, surface roughness and construction environment).
3. Color: Refer to the product color card.
4. Shelf life: 12 months.
2. Theoretical dosage: 1.5-1.8kg/2 times per square meter of coating (the actual dosage will vary depending on the construction method, flower shape, surface roughness and construction environment).
3. Color: Refer to the product color card.
4. Shelf life: 12 months.
Iv. Construction instructions
1. Primary treatment
1. The surface to be coated should be clean and dry, free of dust, loose matter and oil. Stir well before use to ensure the paint is evenly mixed.
2. The water content of the base should be less than 10%, and the pH value should be less than 10. If necessary, the putty can be levelled to obtain a flat base.
3. For the base of cracks, empty drums and other problems, it should be repaired first.
2. Construction conditions
1. Suitable construction temperature is above 5℃, relative humidity is below 85%, avoid construction in strong wind (≥4) weather or rain and snow weather.
2. The same wall with the same color application of the same batch number of products construction, when the same color batch number is different, should be mixed in advance to ensure that the same wall does not produce color difference.
3. Construction method
1. Paint primer: It is recommended to use alkali-resistant sealing primer. Rolling coating can be used. The rolling force is uniform, the speed is coordinated, and the number of rolling brushes is consistent to ensure the same thickness. After the primer is completely dry and cured, the surface of the putty layer should be fully covered with the closed primer coating, and the phenomenon of missing brush, obvious stubbing or trace blooming is not allowed.
2. Partition: Divide the wall according to the design requirements, and separate the wall from the top to the bottom around the entire monomer at the same time to ensure that the corresponding ash seam around the same horizontal line, and then paste the tape paper, first paste the straight line, and then paste the horizontal line, so that the ash seam is horizontal and vertical.
3. Spraying water sand: no need to filter, avoid fierce mixing, the main material is placed in the pressure tank, the spray gun is evenly sprayed, the spray gun is kept at 90° with the wall, one or more times spraying, you can spray once, twice cross-cross spraying, pay attention to control the air pressure and the distance of the spray gun.
4. Paint the top coat: After the water coated sand is completely dry, it is necessary to paint the top coat once or twice (depending on the situation) to achieve better decorative and protective effects. The flat surface can be rolled, and the grooves must be brushed in place with a brush.
1. The surface to be coated should be clean and dry, free of dust, loose matter and oil. Stir well before use to ensure the paint is evenly mixed.
2. The water content of the base should be less than 10%, and the pH value should be less than 10. If necessary, the putty can be levelled to obtain a flat base.
3. For the base of cracks, empty drums and other problems, it should be repaired first.
2. Construction conditions
1. Suitable construction temperature is above 5℃, relative humidity is below 85%, avoid construction in strong wind (≥4) weather or rain and snow weather.
2. The same wall with the same color application of the same batch number of products construction, when the same color batch number is different, should be mixed in advance to ensure that the same wall does not produce color difference.
3. Construction method
1. Paint primer: It is recommended to use alkali-resistant sealing primer. Rolling coating can be used. The rolling force is uniform, the speed is coordinated, and the number of rolling brushes is consistent to ensure the same thickness. After the primer is completely dry and cured, the surface of the putty layer should be fully covered with the closed primer coating, and the phenomenon of missing brush, obvious stubbing or trace blooming is not allowed.
2. Partition: Divide the wall according to the design requirements, and separate the wall from the top to the bottom around the entire monomer at the same time to ensure that the corresponding ash seam around the same horizontal line, and then paste the tape paper, first paste the straight line, and then paste the horizontal line, so that the ash seam is horizontal and vertical.
3. Spraying water sand: no need to filter, avoid fierce mixing, the main material is placed in the pressure tank, the spray gun is evenly sprayed, the spray gun is kept at 90° with the wall, one or more times spraying, you can spray once, twice cross-cross spraying, pay attention to control the air pressure and the distance of the spray gun.
4. Paint the top coat: After the water coated sand is completely dry, it is necessary to paint the top coat once or twice (depending on the situation) to achieve better decorative and protective effects. The flat surface can be rolled, and the grooves must be brushed in place with a brush.
5. Precautions
1. After opening the bucket, try to use it all at once. If not, keep it sealed.
2. Do not stir the colorful paint hard to avoid damaging its stability.
3. The product has been blended under normal use without dilution. If the paint surface temperature is lower than 10°C or the ambient humidity is greater than 85%, do not recommend construction.
4. Before construction, the finished product should be protected, and the window frame, wall, pipeline and other places that do not need to be painted or easily contaminated should be covered or covered.
5. Due to the long drying time of the real stone paint coating, we should pay attention to the weather forecast, make construction arrangements, and avoid rain and snow weather when the coating is not dry. If the coating is not dry after construction and it encounters rain and snow, corresponding measures should be taken to prevent the erosion of water on the wall or coating resulting in color difference.
6. Wear a mask during construction. If it touches your eyes accidentally, rinse with water in time. Clean tools with water immediately after use.
2. Do not stir the colorful paint hard to avoid damaging its stability.
3. The product has been blended under normal use without dilution. If the paint surface temperature is lower than 10°C or the ambient humidity is greater than 85%, do not recommend construction.
4. Before construction, the finished product should be protected, and the window frame, wall, pipeline and other places that do not need to be painted or easily contaminated should be covered or covered.
5. Due to the long drying time of the real stone paint coating, we should pay attention to the weather forecast, make construction arrangements, and avoid rain and snow weather when the coating is not dry. If the coating is not dry after construction and it encounters rain and snow, corresponding measures should be taken to prevent the erosion of water on the wall or coating resulting in color difference.
6. Wear a mask during construction. If it touches your eyes accidentally, rinse with water in time. Clean tools with water immediately after use.
6. Packaging and storage
Store in a cool and dry place above 5 °C and below 35 °C to prevent frost (not less than 0°C). Avoid direct sunlight and fire.
Store in a cool and dry place above 5 °C and below 35 °C to prevent frost (not less than 0°C). Avoid direct sunlight and fire.
